ここから本文です
TWO:"Suppose you let me call for volunteers," suggested Landor. He was sure of his own men, down to the last recruit."Yes, I heard it," she said indifferently. "Was Mr. Cairness really much hurt?"
Classification by type of system
1natural circulation external heating pipe type
2natural circulation calandria type
3forced circulation type
4falling-film type
5rising film type
6jacket type
7coil type
Classification by method of operation
1single effect evaporator system
2multiple effect evaporator system
3auto-vapor mechanical compression system
4auto-vapor ejector compression system
5multistage flash system

After taking into consideration of the physical and chemical property of solutions, the desired design conditions, and available utilities, we select the most suitable type of system by utilizing our years of experience and excellent results.
In addition, we can offer designs and manufacturing services that take into careful consideration compactness, energy-efficiency, and automatization.

THREE:

While standard calandria type evaporation systems are widely used as the typical concentration evaporator by the various food and chemical industries, we have delivered many of those systems as finishing concentration evaporators especially for sugar solutions and starch syrups.

THREE:He did not even hint that he knew of the isolation of their lives, but Cairness was fully aware that he must, and that it was what he meant now. "You ought to go to another country. Not back to Australia, either; it is too much this sort, but somewhere where the very air is civilizing, where it's in the atmosphere and you can't get away from it. I'll tell you what you do." He stood up and knocked the ashes from his pipe against the porch rail. "You've plenty of friends at home. Sell the ranch, or keep it to come back to once in a way if you like. I'm going back in the autumn, in October. You come with me, you and Mrs. Cairness and the boy."
  • Enables flexible operation with little influence from variations in load and raw solution concentrations because of an adequate amount of solution being held within the system. These systems are also suitable for batch type burning evaporators.
  • Concentrations can be controlled within product specifications by the cascade control using the concentrations of concentrated solution and the raw solution supply and also by the arithmetic control of raw solution concentrations, etc. (Result for sugar solutions: 75±0.2wt%)
  • High-viscosity solutions and solutions that may crystallize can also be utilized by installing a propeller in the evaporator as a forced circulation system.
THREE:"It brought back too much that was unpleasant for me. I did not want to talk about it. He saw that I did not, too, and I can't understand why he should have spoken of it. I should have told you after he had gone." She was not disconcerted in the slightest, only a little vindictive toward Forbes, and he thought it would hardly be worth his while to point out the curious position her silence put him in.

This is a process example of a device that continuously and simultaneously concentrates two types of waste liquid with a single high-efficiency steam compressor.

THREE:
  • By evaporating the steam using a mechanical compressor and reusing it, almost no heating steam is alomost required except the time of start-up, so large energy savings can be expected.
  • By combining with a thin film falling heat exchanger that does not raise the boiling point due to the liquid depth, it is possible to utilize the temperature difference of the compressor at the maximum.
  • Since the residence time and heating time are short and the holding amount is small, starting and stopping can be performed in a short time.
  • It will prevent scale adhesion in the can that the evaporator is divided into two parts, and that the supply of the undiluted solution is alternately switched over a fixed period of time to perform heat concentration.